Verint Nextiva S1700e Series Guia do Utilizador descarregar pdf (Página 26)

2: Configuring and Installing the Device

14 Verint Video Solutions

For more information about the connection procedure or the

video modes, refer to the “Managing Connections” chapter, in

the SConfigurator User Guide.

To perform a point-to-point connection:

1. Start SConfigurator.

2. In the Units tab, discover the desired devices.

The discovered devices appear in the Units box.

3. Select the Connections tab, then click Add.

The Connection Creator window appears.

4. Select a transmitter in the left column and a receiver in the

right one.

In the Transmitters column, you have access to the two

encoders of each input; the video stream is the same for

both. Stream1 is typically reserved for web viewing,

therefore you should use Stream2 for point-to-point

connections.

5. In the Video list, select the desired video mode.

6. To disable I/O data transmission (for example, alarms)

between the two selected devices, clear Forward I/O.

7. To disable serial port data transmission (like PTZ

commands), clear Forward Serial Port Data.

8. To enable audio between the devices, ensure that Enable

Audio is checked, then select the audio mode.

9. Click Connect.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 94 95

Sem comentários

Verint Nextiva S1700e Series Guia do Utilizador Página 26