Verint Nextiva S1700e Series Manual do Utilizador descarregar pdf (Página 29)

SConfigurator User Manual

Verint Video Solutions 17

General Status

At the root of the parameter tree, in the Unit pane, you find

system status information on the device: type, firmware

version, and uptime.

Also, you can change the following parameters:

 For the S1100w and S3100 devices, you may have to set

the country of operation. Depending on the country, the

available frequency bands may differ and the DFS (Dynamic

Frequency Selection) and TPC (Transmit Power Control)

regulations may apply.

For more information about these regulations, refer to the

user manual of the device.

 You should assign a meaningful name to every device. This

name will be displayed in the Units box, under the Unit

Name column.

Furthermore, the Unit pane allows you to execute the following

operations:

 Identify the device—Makes the status LED of the device

flash red rapidly to recognize it among a large set of

devices.

 Reboot the device—Performs a warm boot of the device.

This operation will keep the current device configuration.

 Load default settings—Resets all configuration parameters

to their factory settings. For a list of these settings, refer to

the “Factory Default Configuration” appendix in the user

manual of the device.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 98 99

Sem comentários

Verint Nextiva S1700e Series Manual do Utilizador Página 29