Verint NEXTIVA S2800E series Guia do Utilizador descarregar pdf (Página 21)

Nextiva S2800e Series Programming Guide Programming the S2800e Camera • 15

Relay Driver

The Relay Driver menu allows the setup of the power-up state (on or off) and output type (latching or

momentary) of the output relay. The purpose of the relay is to integrate the alarm located on the Verint board

with Nextiva, so that it can be programmed with the IntelliFlow rule engine. For that purpose, the relay must

be connected to the alarm input on the Verint encoder board. For the connection details, refer to the Nextiva

S2800e Series User Guide or see “Alarm Handling” on page 12.

The relay driver options are:

To integrate the S2800e with Nextiva, set the following values:

1. Set the Power On State to ON.

2. Set the Output Type to MOMENTARY.

Source Titling

When Source Titling is selected from the main programming menu, the following commands appear:

They control another powerful feature of the S2800e, the ability to overlay numerous titles on top of the video

image without the use of external devices.

By using internal titles, a camera can take advantage of descriptive text even when in standalone operation.

In addition, all advanced titling features, like sector titling and preset titling, are available to the operator even

when the dome is connected to devices that do not normally support these features.

The source titling options are:

The All Titles menu option allows enabling or disabling of all video

titles. This is a method of globally toggling all titles on or off. The factory

default is Disabled.

The Title Fade Control menu option on the Display Controller menu

allows selective title fading within a programmable time period. This

permits initial identification of the screen and eventual fading of the title

until it disappears. The maximum fade time is 99 seconds.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 33 34

Sem comentários

Verint NEXTIVA S2800E series Guia do Utilizador Página 21