Verint Nextiva S2750e Series Guia do Utilizador descarregar pdf (Página 49)

Verint Video Intelligence Solutions 43

Nextiva S2750e Series User Guide

2. Click Update. The Firmware Update page appears.

3. In the Firmware File group box, click Browse.

4. In the Open dialog box, select the firmware file to use, then click Open.

5. Click Start.

The upgrade operation is executed.

If the update procedure fails:

1. Restart the same procedure immediately.

2. If the problem persists, reboot the device, then restart the update procedure.

3. If the problem persists, look at the status LED for abnormal behavior.

You should take into consideration the following facts regarding firmware updates using the

IP network:

 It can be deactivated in the command line interface (CLI) or the web interface.

 Ensure that the IP link is stable before starting the procedure; therefore it is not

recommended to perform it over the Internet.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 73 74

Sem comentários

Verint Nextiva S2750e Series Guia do Utilizador Página 49